Most of the chronographs are two different gear trains, but the energy source is the same. For example, after the Replica Richard Mille AP Tag Heuer timing function is activated, the more the total energy source does not change, the more naturally it is consumed. To make a metaphor, just like a person eating in the family before, now that the family's total income has not increased, after adding one person, naturally, the monthly living expenses will be consumed a little faster.


Most of the chronographs, when the timing function is turned on, simultaneously drive two sets of gears, which is equivalent to pulling a car before a horse, and now it becomes two cars. The watch will go slower when the other conditions are the same.We tested a new RM 011 with the instrument in the field. The timer is not turned on. The watch will be 0.6 seconds slower per day and 1.6 seconds slower after the timer is turned on. But in addition to this, the biggest impact after the timing function is turned on is the swing of the watch balance wheel, because the gears that are driven increase and the friction increases, so the swing will decrease. For example, the above Di Tonga has a 10 drop in the swing time. Under other conditions, the swing is low, which means that the watch is more susceptible to external shocks, resulting in precision errors. It is worth noting that a lower swing does not mean that the watch is slower. In actual wear, the watch that reduces the swing may become slower or may become faster after being disturbed by the outside world. However, after the timing function is turned on, the watch is definitely more prone to precision errors than before.

RM 011 Replica Richard Mille Watches


The timing drive of the Fake Audemars Piguet Chronograph is mainly divided into two types, one is horizontal clutch and the other is vertical clutch, in which horizontal clutch is the most common. The principle of horizontal clutch is very simple, that is, the travel time wheel (red) and the drive wheel (green) are coupled. When the button is pressed to start the timing function, the drive wheel recouples the chronograph seconds wheel according to the direction of the yellow arrow (blue color). Once the coupling is successful, it means that the energy of the second wheel is passed to the chronograph second wheel, and the timing function is turned on.


The biggest drawback of this horizontal clutch is that it suddenly couples a continuously operating gear to a stationary gear. It is good when the gear teeth are coupled successfully, but if the gear tips just hit together, it is easy to wear the gears. At the same time, at the moment of impact, the front chronograph second hand will slightly tremble.


Therefore, we specially took a small time video of the gear coupling Fake Tag Heuer in the start of the manual chronograph movement. It can clearly see that the wheel tips of the two gears collided together, and after a small meeting, the coupling was successful. When the timing function is frequently switched, in addition to normal wear, it may even cause the teeth to bend and break. The chronograph using the horizontal clutch device may cause gear wear and even deformation and breakage of the teeth. There may be a friend who asks, is there a chronograph for the vertical clutch device that does not have this concern? Yes, the chronograph using the vertical clutch does not have to worry about gear wear, but it still has the weakness that the steel used for switching will break after frequent use. For Fake RM 011 AP Tag Heuer watches, if you don't care about the accuracy and power reserve time, you can always turn on the timing function. However, do not start, pause, or return to zero frequently. If you play this for a long time, it will cause gear wear or steel fracture.